ANSIMAG is the number one manufacturer of sealless magnetic drive Teflon lined pumps in the world and are specifically designed for those who demand reliable and safe pumps. All wetted parts are molded ETFE components that can safely handle a wide range of corrosives and solvents up to 250°F (121°C) without corrosion. A patented, fully encapsulated magnetic drive hermetically seals the inner magnets to isolate them from process fluid and maintain magnet integrity for the life of the pump. A Kevlar‐fiber reinforced vinyl ester shell delivers unprecedented reliability. ANSIMAG sealless magnetic drive pumps are more energy‐efficient than mechanically sealed pumps. An innovative rear casing generates no eddy currents thus eliminating heat generation and reducing energy costs. Because ANSIMAG pumps do not have seals – there are no leaks, no emissions and no costs related to seal maintenance or support systems. ANSIMAG pumps provide affordable replacement options for ASME/ANSI B73.3 and ISO 2858 sized pumps, because the line covers a wide range of sizes and standard external dimensions to facilitate sealless or sealed pump replacement without changing piping or baseplates.

For over 95 years Aurora is a leading supplier of pumps and pump systems used in a variety of markets and applications throughout the world. Their pumps are known for consistent, quality manufacturing and performance that outlasts competitors. Aurora draws on a century of experience to provide you with the pumping solutions you need. Aurora's commitment to excellence goes beyond the product line, with quick ship and fast delivery programs with constant investments in innovation. Aurora offers an extensive line of pumps including ANSI centrifugal, split case, regenerative turbine, inline, multi‐stage, vertical turbine, end suction, solids handling, skid systems and more.

The System One centrifugal pump is designed specifically to operate and maintain reliability even in the most severe process industries. This pump has many upgrades over the conventional ANSI centrifugal pumps including oversized bearings, solid shaft with minimal overhang, micrometer adjustment nuts, positive locking thrust bearing retainer, full support rear leg, centerline casing support, and offers the lowest shaft stiffness ratio (L3/D4) in the process industry and sets the standard for high‐quality and durability. The System One was designed around the mechanical seal and bearings to provide maximum system reliability and a stronger, more vibration‐resistant pump. Also, you can bring the strength and reliability of the System One to your existing ANSI centrifugal pumps with powerend conversions.

Fairbanks Nijhuis offers the industry’s most complete set of solutions, products and services to municipal and industrial customers. A wide variety of pumps and controls serve multiple markets to support a range of needs. Manufacturing operates primarily out of Kansas City, KS, USA and Winterswijk, The Netherlands. The combination of our two world-class engineering and manufacturing groups, with over 200 years of combined expertise, is a win for our customers around the globe.

Grindex’s first submersible pumps hit and took the market by storm in 1960 starting an era of supplying reliable dewatering pumps to some of the most demanding application in construction, mining, tunneling and heavy industry. Today, Grindex leads the world in its field. They take pride in making high-quality pumps for the toughest environments, their pumps are designed for continuous, unattended operations, and with an appealing life-cycle cost.
Grindex offers 5 classes of pumps so you can choose the right pump for your application, Drainage, Sludge, Stainless Steel (Inox), Slurry (Bravo) and Primo, and accessories for enhanced abilities and flexibility.

In 1947, HMD shattered new ground in pump and fluid handling technology by developing the very first sealless magnetic drive pump. With more than 70 years of experience, HMD Kontro continues to be an industry leader and stands as one of the most reliable pump manufacturers operating today.
The HMD Kontro sealless pump is ideally suited for applications where the fluid being pumped is hazardous, aggressive or a valuable product as the sealless design offers total containment. Also, the lifetime cost of a magnetic drive pump is significantly lower than a traditional sealed pump. No seals mean low maintenance and significantly reduced operating costs. There are no seals to replace and no seal support system to specify, install or maintain, and all this means less downtime and less clean-up for further savings.

The foundations were laid around 1913, when the company was active in the agricultural sector and the evolving phases of polder drainage. As early as 1916, electrically driven pumping stations were installed with Archimedes screw pumps alongside countless wind driven pumping stations. The philosophy behind the design of their products has always been quality, keep it simple, long life and less maintenance, thus reducing lifetime costs and being better for the environment; more robust, stronger, dedicated to the job and tailored to your demands. Over the past 100+ years, Landustire’s product line has grown to be your comprehensive manufacturer for wastewater solutions.

Layne/Verti-Line has manufactured industry-leading vertical turbine pumps for over a century from its humble beginnings in 1882. Layne/Verti-Line has grown to manufacture time-tested centrifugal pumps in a multitude of markets with manufacturing based at the Pentair Water facility in Kansas City, KS. Under Pentair and in-line with their commitment to constantly evolving and improving to meet changing industry needs and its tradition of excellence, Layne/Verti-Line entrust Coastal Reliability as their industrial representative, distributor and reliable support provider in Florida.

Founded in 1870 in Ashland, OH by Francis and Philip Myers (brothers), it is one of the oldest pump manufacturers still operating today (celebrating 150 years in 2020). From their modest beginning of engineering and manufacturing the first double-acting hand pump, the line grew and evolved to meet new challenges and industries. By the early 1900’s, Myers became the largest pump manufacturer in the United States. In 1986, Myers become part of Pentair vaulting the company to a position of leadership of wastewater, solids handling and submersible pumps in the world, all while never forgetting where the company originated and their devotion to excellence. With over 1-1/2 centuries of experience, you can depend on Myers to provide high quality pumps that, just like the brand, will stand the test of time.

Manufactured in Green Bay, WI, Summit offers quality centrifugal and positive displacement pumps and parts, and an alternative to your pump and solution needs. Summit’s company mission statement, “provide quality pumping products in a timely manner, at a fair market price” is more than just a slogan or plaque on the wall, it is their promise and dedication to their customers and the pump market. Summit also manufacturers quality pump parts that are completely interchangeable with other major OEMs, such as Goulds®, Durco®, Gorman-Rupp®, Peerless®, Worthington, Moyno® and several more. With more than 12 million dollars in inventory, Summit is ready to ship pumps and parts for customers’ needs at a moments notice.

Sundyne’s heritage of innovation and integrity makes it a global leader in providing process industry solutions and one of the few companies that designs and manufacturers both pumps and compressors. With more than one million potential configurations and offerings, Sundyne can custom-engineer and test to exactly meet each design requirement, even for the most demanding of applications. Sundyne has assembled industry-leading brands that provide customers with a wide range of fluid and gas handling services and solutions. Brands like Ansimag, HMD Kontro, Marelli, PPI and Sunflo have broadened the original Sundyne portfolio for a wider range of markets and to meet most standards, including ANSI, ISO and API, and offers for non-standard solutions for a range of general industrial applications.

Tesla Disk Pumps are designed for the most abrasive and erosive particulate, slurry and sludge applications while being highly resistant to wear, and can also gently handle the most fragile of crystals, sensitive chemicals and polymer emulsions. Tesla Disk Pumps are specifically engineered and designed to meet your challenging process requirements, with a unique design, they can move pipe-size solids without clogging or plugging. Tesla Disk Pumps use the latest improved designs of disk pump technology and follows the boundary layer and viscous drag phenomena to transfer the energy from the motor to the fluid. The Tesla Disk Pump also boast a low shaft stiffness ratio (L3/D4) aided in pump and mechanical seal reliability.

For over 40 years, Vertiflo has been committed to manufacturing high quality vertical process, sump, end-suction and self-priming pumps in a multitude of materials to meet a wide range of demanding applications. Vertiflo, based in Cincinnati, OH, is recognized as a quality manufacturer of dependable pumps with a superior lead time, usually half the typical time frame of a competitive pump. With tens of thousands in operation worldwide, Vertiflo continuous to grow and encompass an ever-widening range of applications in the pump industry.

For well over a century, the Blackmer reputation for unparalleled product performance, superior service and support, innovation and a commitment has been a driving force in their organization. As one of the few companies that designs and manufacturers both pumps and compressors, Blackmer is your complete solution for liquid and gas handling. Manufacturing single and two stage reciprocating gas compressors equipped with high efficiency valves, ductile iron pistons, self-adjusting piston rod seals and other robust features, they are designed to provide maximum performance and reliability under the most severe service conditions.

Blackmer’s gas compressors are available in three model series, LB, HD and NG. The LB Series is ideal for the transfer and recovery of gases including propane, butane, LPG and anhydrous ammonia. The HD Series reciprocating gas compressors are suited for the movement, transfer and recovery of liquefied gases such as carbon dioxide and refrigerants, nitrogen, air, and numerous other industrial, petrochemical, and hazardous gases. The NG series is built for usage with natural gases.

PPI (Sundyne) diaphragm compressors deliver total assurance of non-contaminating gas compression and handling ultra-pure, corrosive and volatile gases. Boasting a leak tight mechanism that features static seals which do not need to be purged or vented, these compressors present absolutely no leakage threat to the atmosphere, providing an ideal solution for safely handling ultra-pure, corrosive and volatile gases. Additionally, PPI diaphragm compressors are designed to isolate the process media from the piston or piston rings with a set of metallic diaphragms, completely eliminating the risk of cross contamination. Built to meet stringent API 618 standards for reciprocating compressors, these machines are available in a variety of flexible configurations and sizes, making them easily customizable to meet the ideal pressure ratio for your application.

In 1965, Sundyne designed and built the first integrally geared vertical compressor for Union Carbide. The space saving design was based on the very successful Sundyne LMV integrally geared pump technology. Since then, more than 55 years of experience and innovation has come from thousands of deployments in oil and gas upstream, midstream and downstream plants in some of the world’s most demanding environments.
Today, the Sundyne compressor line features single- and multi-stage centrifugal designs for API 617 and fit-for-purpose applications including fuel gas boost in power generation.  Each model is custom built to provide pulsa­tion- and vibration-free operation, and to deliver oil-free process gas with zero emissions.
NACE compliant Sundyne compressors do not rust or corrode.  Each unit is engineered in accordance with industry standards and is designed to run continuously for 5 to 7 years without the need for costly maintenance or over-hauls.
Sundyne gas compressors provide the performance envelope, the feature set, the reliability ratings and the uncompromising efficiency needed to address the Best Efficiency Point (BEP) for any application.

From the manufacturers who brought the most versatile industrial grade pump for high pressure water applications, the Sunflo Pump, also offers the Sunflo Blower. These blowers are perfectly designed for jet aircraft engine cooling, industrial manufacturing, municipalities or other applications where compact and lightweight designs are needed. These highly reliable blowers feature many aspects such as pulsation free operation, oil free air delivery and generous clearances to eliminate performance deterioration caused by wear and the need for mechanical adjustment.

Flowguard USA was established in 1980 and is devoted entirely to the design, manufacture and marketing of equipment for solving pulsations, vibrations, surges and expansions in pipelines. They specialize in identifying problems in a wide variety of industries and finding cost effective, technologically viable solutions which are often custom designed and fabricated. Flowguard USA has quickly grown to become a preferred brand to dampen or eliminate pulsations for the benefit of downstream processes or instrumentation.

Maric Flow Control manufacturers fixed flow control orifices that maintain a pre-set, constant flow rate regardless of pressure even while the upstream and downstream pressures are changing. Established in 1963, Maric flow controls are engineering and manufactured in Adelaide, Australia and offer valuable protection for flow rate sensitive equipment, processes or distribution systems. The technology is based on a precision molded rubber control ring in the body, with an orifice diameter that varies in response to the pressure differential applied to it, the greater the pressure, the smaller the orifice, and vice versa, therefore maintaining a constant, pre-set flow.

Secespol, founded in 1988, is a leading manufacturer of heat exchangers renowned worldwide for their products and quality for over 30 years. Cutting-edge technology and in-house manufacturing has been ensuring that Secespol is providing their customers the best quality of heat exchangers. Secespol is focused on innovation and development which is evident by the numerous awards and patents and best quality standards are proven by their certificates and approvals. Apart from standard products, like shell & tube, brazed plate and gasketed heat exchangers, Secespol also provides tailored heat transfer solutions for petrochemical, heat, power, food, pharmaceutical and other industries, and they are eager to undertake your complex and technologically demanding projects.

ANSIMAG is the number one manufacturer of sealless magnetic drive Teflon lined pumps in the world and are specifically designed for those who demand reliable and safe pumps.
All wetted parts are molded ETFE components that can safely handle a wide range of corrosives and solvents up to 250°F (121°C) without corrosion.  A patented, fully encapsulated magnetic drive hermetically seals the inner magnets to isolate them from process fluid and maintain magnet integrity for the life of the pump.  A Kevlar-fiber reinforced vinyl ester shell delivers unprecedented reliability.
ANSIMAG sealless magnetic drive pumps are more energy-efficient than mechanically sealed pumps.  An innovative rear casing generates no eddy currents thus eliminating heat generation and reducing energy costs.  Because ANSIMAG pumps do not have seals – there are no leaks, no emissions and no costs related to seal maintenance or support systems.
ANSIMAG pumps provide affordable replacement options for ASME/ANSI B73.3 and ISO 2858 sized pumps, because the line covers a wide range of sizes and standard external dimensions to facilitate sealless or sealed pump replacement without changing piping or baseplates.

In 1899, R. M. Blackmer came up with the vane-type pump design that was an important departure for the old gear-type principle. This positive displacement pump revolutionized the pumping industry with their unique sliding vane technology. This revolutionary rotary sliding vane design allows the pumps to self-adjust for wear to help maintain flow rates and creates excellent self-priming and dry-run capabilities, while also providing sustained performance and trouble-free operation. For well over a century, the Blackmer reputation for unparalleled product performance, superior service and support, innovation and a commitment has been a driving force in their organization. Today, Blackmer, part of Dover and PSG, is still the leader in sliding vane technology and father to hundreds of different pump models, such as the MAGNES and SMVP Mag-Drive Series sliding vane pumps which are ideal for critical high-value, hazardous and hard to seal fluids.

EnviroGear, a product of PSG, a Dover company, is a global provider of innovative, high-quality industrial gear pumps for the safe and efficient transfer of high-value and hard-to-seal fluids. EnviroGear's mission is to engineer the world's safest and most reliable internal gear pumps by understanding their customers' needs. EnviroGear is passionate about customer service, offering responsiveness, speed of delivery and application support unmatched by any other company in the industry. EnvioGear offers 3 series of pumps, one of which is the E-Series, a revolutionary mag-drive internal gear pump. The E-Series features a patented between-the-bearing support system and single fluid chamber design amongst several other industry leading innovations. E Series pumps have been engineered to be a cut above the competition and eliminates leaks and reduces mechanical wear, helping increase the safety of site personnel and the environment.

In 1947, HMD shattered new ground in pump and fluid handling technology by developing the very first sealless magnetic drive pump. With more than 70 years of experience, HMD Kontro continues to be an industry leader and stands as one of the most reliable pump manufacturers operating today.
The HMD Kontro sealless pump is ideally suited for applications where the fluid being pumped is hazardous, aggressive or a valuable product as the sealless design offers total containment. Also, the lifetime cost of a magnetic drive pump is significantly lower than a traditional sealed pump. No seals mean low maintenance and significantly reduced operating costs. There are no seals to replace and no seal support system to specify, install or maintain, and all this means less downtime and less clean-up for further savings.

In 1906, Mouvex’s founder Andre Petit identified the challenges that gear and lobe pump users were facing in optimizing their process and invented the eccentric disc pump as a result. Eccentric disc pumps consist of a cylinder and pumping element mounted on an eccentric shaft. As the eccentric shaft is rotated, the pumping element forms chambers within the cylinder, which increase in size at the intake port, drawing fluid into the pumping chamber. The fluid is transported to the discharge port where the pumping chamber size is decreased and squeezes the fluid out into the discharge piping. For over a century, Mouvex has provided premium performance and ultimate containment and safety earning a reputation as the ideal pumping solution for a multitude of applications worldwide.

For 35 years Flex-A-Seal has grown to be an industry leader at the forefront of sealing solutions and technical advancements, including the development of the world’s first patented two-piece split cartridge mechanical seal. Flex-A-Seal products are designed, engineered and manufactured in the USA. Their facilities contain state of the art bellows welding capabilities, CNC machining centers, quality control and extensive inventory systems. Flex-A-Seal offers a complete line mechanical seals including OEM replacement seals, support systems and repairing competitors seals.

Fluidol brings a completely new approach to sealing in many applications for pumps, mixers and other rotating equipment. Fluidol was founded in 1981 as a seal design company quickly becoming an innovator in the industry. In 2001, Fluidol designed and began manufacturing their Style 42 Triple-Lip Cartridge Seal that would address many of the sealing issues that caused failures for most pusher-type seals. The Style 42 quickly gained the name “Super Pump Seal” or “SPS” as it was the cartridge seal that will survive where other just cannot. Fluidol is innovative engineering for fluid sealing.

Since 1889, Palmetto Packings has been a leading, American, manufacturer of high-quality mechanical packing. Mechanical packing is the oldest method of keeping fluid escaping past a shaft and Palmetto has been an innovator and engineered solutions provider for the technology for over a century. Palmetto is committed to bringing the most effective packings on the market to their customers and will continue investing in new solutions to meet your most critical sealing requirements.

Jesco provides of the most expansive offerings for digitally and mechanically controlled chemical injection metering pumps and dosing equipment. By consistently meeting the highest of standards relative to the quality of equipment, customer service, delivery and flexibility, Jesco has achieved an outstanding position within the chemical feed and metering pump technology industry. With turn-down ratios of 1000:1 and accuracies of +/- 1%, you can count of Jesco’s quality and reliability for your next project.

LEWA is known worldwide as a market leader in the handling of supercritical fluids and creating end-to-end clean fluid processing platforms. LEWA pumps provide high metering accuracy with a quality, durability, reliability, safety and efficiency unmatched in the industry. For over six decades LEWA has set the technical standards for manufacturing of diaphragm metering pumps, packed plunger metering pumps, process pumps and complete metering systems and plants.  Pumps from LEWA are used today in a wide range of applications and industries, from the extremely sensitive in the food industry to the harsh in petrochemistry and refinery.

Lutz, founded in 1954, is the world’s premier manufacture of drum pumps and accessories, and, in recent years, Lutz has developed into a synonym for complete systems designed to handle any fluid filling or transfer job. Whether you need a single pump, a complete set or a customized unit, Lutz is your reliable partner in the field of professional liquid handling. With its U.S. location in Norcross, GA, we can ship Lutz pumps, flow meters and accessories quickly when not in stock our local stock.

Allen Industries is continuously setting the standard for FRP tank manufacturing. Whether your tank is for holding cooling water or industrial chemicals, you can rest assured that Allen Industries will manufacturer your tank precisely to spec.
provides fiberglass tanks to companies across the nation for storage of water, chemicals, food products, pharmaceutical, specialized processes and government projects. Its tanks can be ordered in vertical, horizontal or rectangular form with flat, dome, cone, or sloped tops and/or bottoms. The capacities of our tanks range from 25 gallons to over 40,000 gallons.

Assmann Corporation is a renowned manufacture of polyethylene storage tanks that are engineered and processed for even the most challenging applications. From the beginning, selecting the best virgin resins, with no re-grind, for each application coupled with Assmann's equipment, tooling, extensive processing experience and commitment, the quality of construction provides a superior storage tank than any other competitor. At Assmann, they are continuously finding ways to increase efficiency in the process but will never abandon their successful methods for any cost-cutting measure that would compromise the quality and integrity of the polyethylene tanks for which they have become known for. Even experienced tank users receiving an Assmann tank for the first time will remark favorably on how it compares to units they’ve used in the past or currently have in their systems. Assmann takes pride in their workmanship and being an American manufacturer and extends a welcome to all to visit the plants.

Peristaltic pump manufacturer Albin Pump develops manufactures and sells seal less pumps which simplifies and increases efficiency for our customers through innovative solutions. We have a long history of providing excellent pump systems for our client’s needs. The driving force behind the company is to provide better pump solutions.

In 1899, R. M. Blackmer came up with the vane-type pump design that was an important departure for the old gear-type principle. This positive displacement pump revolutionized the pumping industry with their unique sliding vane technology. This revolutionary rotary sliding vane design allows the pumps to self-adjust for wear to help maintain flow rates and creates excellent self-priming and dry-run capabilities, while also providing sustained performance and trouble-free operation. For well over a century, the Blackmer reputation for unparalleled product performance, superior service and support, innovation and a commitment has been a driving force in their organization. Today, Blackmer, part of Dover and PSG, is still the leader in sliding vane technology and father to hundreds of different pump models.